User's Manual

17
4. [Trigger report setup]
The unit has built-in door magnetic sensor and tamper switch, user can select if send report when the door
sensor and tamper switch has triggered.
1.door sensor :It will send out event reports when door on or off.
2.Tamper switch: the tamper switch is used to check the box of host, when the box of host is moved over, it will
send out a relevant report.
CTS-100 SPECIFICATIONS
Physical Parameters
Enclosure dimensions (mm) 96(L)*50(W)*42(H)
Unit Weight About 400g
Electrical
Operating current 52mA
Voltage (Recharge)
5V－16V
Current (Recharge) 770mA
Current (sleep) 0.5-11.6mA
Battery
Battery type Battery capacity Charge type
Battery Lithium 3.7V 3600mAh Built-in charge circuit