User's Manual

3. [Report]:

Report setup can be configured in this section. To activate the function(s), please select “√” in checkbox and fill

in data in the textbox. There are 2 modes for the CTS-100, first is the Normal mode, and second is the Power

saving mode. In normal mode, the GPS will be always activated if CTS-100 is in moving state. However, if in

Power saving mode, CTS-100 will turn off the GPS power if there is no report to send.

Note: that user can configure the wakeup report if the device is in “stop” (not moving) state.

Normal mode, report will be summarized as:

(1) Fixed time report

Parameters: On/Off, and time.

(2) Fixed distance report

Parameters: On/Off, and distance. (min. distance is 0.1 km, max. distance is 100 km).

(3) Speeding report: (min. speed is 0.1 km/Hr, max. speed is 1000 km/Hr).

Parameters: on/off, and speed