Owner's Guide

Arming the Security System

To arm the system, exit the vehicle, close all doors, then press the button. The

parking lights will ash one (1) time, indicating the system is armed, has locked the

doors (if equipped and connected) and activated the starter disable feature. The LED

status indicator will blink steadily, once per second.

Using Your Remote Control

Disarming the Security System

To disarm the system press the button. The parking lights will ash three (3) times,

and remain ON for four (4) seconds indicating the system is disarmed and has

unlocked the doors (if equipped and connected).

Note: If the system was triggered while the driver was away from the vehicle it will

beep and ash the parking lights four (4) times.

Activating the Trunk Release Feature (Optional)

If this feature is enabled on your system, pressing and holding the button for 3

seconds will open the vehicle’s trunk or hatch.

Using the Personal Protection Alarm (Panic)

Press and hold the button for 2 seconds to activate the personal protection alarm.

During panic mode, the normal function of the transmitter buttons will be suspended.

To stop the alarm, press the or button on the transmitter.

Using the Car Finder Feature

When the system is Armed, Press the button to locate your vehicle. The system will

ash the parking lights and beep ten (10) times. To stop the Car Finder feature, Press

the one (1) time.

Silent Arming or Disarming the Security System

To Arm or Disarm the system silently, press then or buttons. The parking lights

will ash indicating the system has armed / disarmed.

Note: If the system was triggered it will not beep to notify the driver of the alarm

trigger. The system will ash the parking lights only.

Activating the AUX Output (Optional)

If this feature is enabled on your system, pressing the and buttons simultaneously

will activate an optional feature. This feature can be programmed for a wide range

of functions like power window or sunroof automation, please consult your installing

dealer to determine the functionality of your system.