Installation Guide

8
Lowes.com/allenandroth
ASSEMBLY INSTRUCTIONS
Restore power and test fixture (A).
If light does not function, please refer to
TROUBLESHOOTING on the next page.
Install one standard-base bulb (not
included). Use either a 60-watt max.
incandescent bulb or a 13-watt CFL.
CAUTION: When replacing bulb,
please allow bulb and fixture to cool down
before touching.
Remove socket ring (D) from the socket
on fixture (A). Attach metal shade (G) to the
socket using socket ring (D).
10.
11.
Secure fixture (A) to mounting plate (B)
using the decorative nuts (C) previously
removed (Step 3, Page 5).
9.
NOTE: Before tightening decorative nuts
(C) completely, use level (not included) to
check fixture (A) -- adjust if necessary.
9
C
C
A
10
11
Socket
D
A
G
A
Bulb