Installation Guide

ASSEMBLY INSTRUCTIONS
7
Lowes.com/allenandroth
Wrap electrical tape (not included) around
each individual wire connector (AA) down to
the wire. Push wire connectors (AA) gently
back into outlet box. Carefully push excess
wiring into outlet box.
WARNING: Make sure no bare wire or
wire strands are visible after making
connections.
8.
AA
8
A
AA
7.
x 3
Hardware Used
E3 Wire Connector
AA
Outlet Box
BARE/
GREEN
7
A
WHITE
BLACK
AA
AA
AA
Prepare wires by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included).
Connect WHITE wire from fixture (A) to WHITE wire
from outlet box using existing wire connector or wire
connector (AA). Connect BLACK wire from fixture (A)
to BLACK wire from outlet box using existing wire
connector or wire connector (AA). Connect
BARE/GREEN ground wire from outlet box to BARE
ground wire from fixture (A) with wire connector (AA).
NOTE: Screw wire connectors (AA) on in a clockwise
direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA) are
designed to accept only one 12-gauge house wire
and two lead wires from the light fixture. If your
house wire is larger than 12-gauge or there is more
than one house wire to connect to the corresponding
fixture lead wires, consult an electrician for the
proper size wire connectors to use.