Installation Guide

ASSEMBLY INSTRUCTIONS
Attach mounting plate (B) to outlet box (not included)
using existing washers and outlet box screws or the
machine screws (CC). NOTE: If the outlet box screws
required for your outlet box are of a different size
than the machine screws (CC), consult a licensed
electrician before proceeding.
Use a level (not included) to adjust mounting plate
(B) as needed so preassembled screws (E) in
mounting plate (B) are parallel with floor and ceiling,
then tighten machine screws (CC) completely to
secure mounting plate (B).
CAUTION: Make sure the outlet box can support
35 lbs. hanging weight. Use metal outlet box; plastic
outlet boxes are not recommended.
Remove decorative nuts (C) from front of fixture
(A) and remove mounting plate (B) from back of
fixture (A). Save decorative nuts (C) for later
use.
3.
4.
5
Lowes.com/allenandroth
3
A
C
B
Outlet Box
Wiring
4
B
E
E
F
Hardware Used
Machine Screw
x 2
CC
Washer