Installation Guide

6
ASSEMBLY INSTRUCTIONS
BARE/GREEN
WHITE
WHITE
BLACK
Outlet
Box
Prepare fixture wires by stripping 3/4 in. of insulation
from wire ends using wire strippers (not included).
Connect WHITE wire from fixture (A) to WHITE wire
from outlet box using existing wire connector or wire
connector (AA). Connect BLACK wire from fixture (A)
to BLACK wire from outlet box using existing wire
connector or wire connector (AA). Connect
BARE/GREEN ground wire from outlet box to BARE
wire from fixture (A) using existing wire connector or
wire connector (AA).
NOTE: Screw wire connectors (AA) on in a clockwise
direction.
WARNING: Never connect BARE/GREEN
ground wire to WHITE or BLACK power supply
wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors provided
with this light fixture are designed to accept only one
12-gauge house wire and two lead wires from the
light fixture. If your house wire is larger than
12-gauge or there is more than one house wire to
connect to the corresponding fixture lead wires,
consult an electrician for the proper size wire
connectors to use.
5
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
Push wire connectors (AA) gently back into outlet
box. Carefully push excess wiring into outlet box.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
6
5.
6.
Lowes.com/
p
ortfolio
C
A
AA
AA
AA
x 3
Hardware Used
E3 Wire Connector
AA
A