Installation Guide

8
ASSEMBLY INSTRUCTIONS
10.
Install one standard-base bulb (not included).
Use a 60-watt max. incandescent bulb or
CFL/LED equivalent.
WARNING: When replacing bulb, please
allow bulb and fixture (A) to cool down before
touching them.
Restore power and test fixture (A).
If light does not function, please refer to
TROUBLESHOOTING on the next page.
8.
Align holes in fixture (A) with screws (D) on
mounting strap (B) and push fixture (A)
toward wall. Attach fixture (A) to mounting
strap (B) using the decorative nuts (C)
previously removed (Step 4a, page 6).
Note: Fixture (A) can be installed with the
sockets facing either up or down.
Reinstall glass shade (F) and socket ring
(G) previously removed (Step 3, page 5).
9.
9
A
F
G
A
D
C
8
6
10
A