Installation Guide

7
ASSEMBLY INSTRUCTIONS
Prepare wire by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included).
6.
Connect WHITE wire from fixture (A) to WHITE
wire from outlet box using wire connector (AA).
Connect BLACK wire from fixture (A) to BLACK
wire from outlet box using wire connector (AA).
Connect BARE/GREEN ground wire from outlet
box to BARE wire from fixture (A) using wire
connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors provided
with this light fixture are designed to accept only
one 12-gauge house wire and two lead wires from
the light fixture. If your house wire is larger than
12-gauge or there is more than one house wire to
connect to the corresponding fixture lead wires,
consult an electrician for the proper size wire
connectors to use.
x 3
Hardware Used
Wire Connector
AA
6
Outlet
Box
WHITE
BARE/GREEN
AA
A
AA
BARE
BLACK
AA
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
Carefully arrange excess wiring and wire
connectors (AA) within outlet box.
7.
7
Outlet
Box
AA
AA
AA