ITEM #2062003 2602004 OUTDOOR WALL LANTERN PORTFOLIO® and PORTFOLIO & DesignTM are trademarks or registered trademarks of LF, LLC. All rights reserved. MODEL #WL132MBK WL132WW Français p. 11 Español p. 21 ATTACH YOUR RECEIPT HERE JOIGNEZ VOTRE REÇU ICI ADJUNTE SU RECIBO AQUÍ For Wet Location Purchase Date E87731 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday - Sunday.
TABLE OF CONTENTS Package Contents ............................................................................................................... 2 Hardware Contents .............................................................................................................. 3 Safety Information ................................................................................................................ 3 Preparation ......................................................................................
HARDWARE CONTENTS (shown actual size) BB AA CC Wire Connector Qty. 3 Fixture Screw Qty. 2 DD EE Mounting Plate Decorative Nut Qty. 1 Qty. 2 Nut (preassembled to (CC)) Qty. 2 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product.
SAFETY INFORMATION DANGER • DO NOT connect the bare or green insulation fixture ground wire to the black (HOT) current-carrying wire or the white neutral house wire. Connection of the bare or green fixture ground wire to the black or white house wires may cause metal parts of the fixture to carry electrical currents. Under this condition, anyone coming in contact with the fixture will receive electrical shock, which could cause serious injury or death.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to install, operate or assemble the product.
ASSEMBLY INSTRUCTIONS 3. Insert fixture screws (CC) completely into mounting plate (AA), one directly across from the other. Attach one nut (EE) to each fixture screw (CC). [Adjustment will be made later.] 3 AA Hardware Used EE CC AA Mounting Plate [not shown actual size] x1 CC Fixture Screw x2 EE Nut x2 4. Attach mounting plate (AA) to outlet box (not included) using the existing outlet box screws and washers.
ASSEMBLY INSTRUCTIONS 5. Temporarily place fixture (A) over mounting plate (AA) to determine amount of adjustment necessary for fixture screws (CC). NOTE: Fixture screws (CC) should come through holes in fixture (A) just enough so decorative nuts (DD) fit flush against fixture (A) when mounted. Once fixture screws (CC) are adjusted, use pliers (not included) to tighten nuts (EE) securely against mounting plate (AA). Outlet Box 5 DD A AA CC Set fixture (A) aside.
ASSEMBLY INSTRUCTIONS 6b. Connect BARE/GREEN ground wire from outlet box to BARE wire from fixture (A) using wire connector (BB). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using wire connector (BB). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using wire connector (BB). 6b BLACK WHITE BB BB A NOTE: Screw wire connectors (BB) on in a clockwise direction. BARE WARNING: Never connect ground wire to WHITE or BLACK power supply wires.
ASSEMBLY INSTRUCTIONS 8. Align holes in fixture (A) with fixture screws (CC) on mounting plate (AA) and push fixture (A) toward wall. Attach fixture (A) to mounting plate (AA) using the decorative nuts (DD). 8 AA A DD Hardware Used AA Mounting Plate [not shown actual size] DD x1 CC CC Fixture Screw x2 DD Decorative Nut x2 9. Install one 60-watt max. standard-base incandescent bulb (not included) or CFL/LED equivalent.
ASSEMBLY INSTRUCTIONS 11. After completing installation, caulk mounting surface of fixture (A) with silicone weather sealant (not included). 11 WARNING: Failure to caulk fixture mounting surface with silicone weather sealant may result in water damage in outlet box, which may cause electrical malfunction or electrical shock. A CARE AND MAINTENANCE Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean shade. Do not use an abrasive cleaner on shade or fixture.
