Installation Guide
7
Lowes.com/
p
ortfolio
ASSEMBLY INSTRUCTIONS
8
Glass Shade
(representative
only)
C
8.
9.
7.
Outlet
Box
Fixture
Screw
Fixture
Screw
D
6
7
B
A
D
D
Remove socket rings (C) from sockets of fixture
(A). Attach glass shades (sold separately) to
sockets, securing with socket rings (C).
CAUTION: Do not overtighten socket rings (C)
as glass may crack or break.
Install four standard-base bulbs (not included). Use
either 60-watt max. incandescent bulbs or 13-watt
CFLs.
WARNING: When replacing bulbs, allow bulbs,
glass shades and fixture to cool down before
touching.
Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING on the following page.
Align holes in fixture (A) with fixture screws in
mounting plate (B) and push fixture (A) toward wall.
Attach fixture (A) to mounting plate (B) using the
decorative nuts (D) previously removed (Step 3,
page 5).
Note: Fixture (A) can be installed with the sockets
facing either up or down.
A
Bulb
9
A