Installation Guide

Lowes.com/

ortfolio

ASSEMBLY INSTRUCTIONS

Wrap electrical tape (not included) around each

individual wire connector (AA) down to the wire. Push

wire connectors (AA) gently back into outlet box.

Carefully push excess wiring into outlet box.

WARNING: Make sure no bare wire or wire

strands are visible after making connections.

Unwrap BARE wire on fixture (A) from BLACK and

WHITE wires. Prepare wires by stripping 3/4 in. of

insulation from wire ends using wire strippers (not

included). Connect WHITE wire from fixture (A) to

WHITE wire from outlet box using existing wire

connector or wire connector (AA). Connect BLACK

wire from fixture (A) to BLACK wire from outlet box

using existing wire connector or wire connector (AA).

Connect BARE/GREEN ground wire from outlet box to

BARE ground wire from fixture (A) with wire connector

(AA).

NOTE: Screw wire connectors (AA) on in a clockwise

direction.

WARNING: Never connect BARE/GREEN ground

wire to WHITE or BLACK power supply wires.

WARNING: To reduce the risk of fire, electrical

shock or personal injury, wire connectors (AA) are

designed to accept only one 12-gauge house wire and

two lead wires from the light fixture. If your house wire

is larger than 12-gauge or there is more than one

house wire to connect to the corresponding fixture

lead wires, consult an electrician for the proper size

wire connectors to use.

x 3

Hardware Used

E3 Wire Connector

Outlet

Box

WHITE

BLACK

BARE/

GREEN

Outlet

Box