Installation Guide

5
ASSEMBLY INSTRUCTIONS
Lowes.com/portfolio
3
White Wire
From Outlet Box
Black Wire
From Outlet Box
Bare, or Green
Ground Wire
Bare, or Green
Fixture Ground Wire
From Outlet Box
Bare, or Green
Ground Wire
From Outlet Box
White or
Ribbed Side
From Fixture
From Fixture
Black or
Smooth Side
OR
AA
Hardware Used
AA
x 3
Wire
Connector
Green Ground Screw
3. Attach ground fixture wire to either the green ground
screws preassembled on the crossbar assembly (A)
or to the ground wire in the outlet box (usually
GREEN or BARE). If attaching fixture ground wire to
the crossbar assembly (A), it is imperative the outlet
box in your home be properly grounded. Connect the
neutral WHITE or RIBBED fixture wire to the neutral
(usually WHITE) wire from the outlet box. Connect
the hot BLACK or SMOOTH fixture wire to the hot
(usually BLACK) wire from the outlet box.
Fasten wires together with wire connectors (AA) and
tightly wrap wire connectors (AA) with electrical tape
(not included).
Outlet Box
D
D
C
B
A
4
5
Mounting Screw
Mounting Ball
4. Carefully tuck all wires into the outlet box. Place the
backplate of fixture body (D) over the outlet box and
install as per step 2. Tighten mounting balls until
snug.
Note: Fixture body (D) can be installed with the
sockets facing either up or down.
5. Remove the preassembled socket collars (B) from
the fixture body (D). Place the shades (C) onto the
sockets and secure with the socket collars (B).
Hand tighten until snug.