Installation Guide

6
ASSEMBLY INSTRUCTIONS
7
7. Place the shade (C) and the previously removed flat
washer onto the stem, securing with the previously
removed hex nut. Hand tighten until snug.
8. Attach the short link of chain (E) onto the hook on
fixture body (B), then attach the other end of chain
(E) to the loop inside shade (C). Repeat for
remaining chains (E).
C
9
9. Place the previously removed cap over the stem
protruding from the shade (C), securing with the
previously removed finial. Hand tighten until snug.
C
10
Stem
Stem
Cap
Finial
Lowes.com/portfolio
668
Hex Nut
Flat Washer
E
C
B
10. Install the bulbs (not included). Use 75-watt max.
standard-base incandescent bulbs or 18-watt
max. standard-base spring self-ballasted CFLs.