Installation Guide

5
Hardware Used
AA
x 3
Mounting
Screw
AA
B
4. Thread the beaded end of the center stem (B)
into the mounting hole on the top center of the
junction box in the fixture body (C). Hand tighten
until snug.
I
4
ASSEMBLY INSTRUCTIONS
C
3. Coat the top 1 in. of the post with clear silicone
caulk (not supplied) and position the post fitter
on the fixture body (C) onto the post. Be sure to
seat it completely, aligning the holes in the fitter
with the 1/16 in. pilot holes drilled into the post.
Secure the fixture to post with 3 mounting screws (AA).
3
Post
Mounting
Hole
Mounting
Hole
Post Fitter
C
Lowes.com/portfolio