Specification
SPECIFICATION FEATURES
Lower Shielding Reflector
Painted die cast aluminum or spun 
aluminum lower reflector with 
a lensed upper optical chamber 
providing superior lumen output 
with minimal source brightness. 
Spun reflectors are offered in all 
Portfolio Alzak® finishes. Available 
with non-conductive polymer 
trim. Reflector is retained with two 
torsion springs holding the flange 
tight to the finished ceiling surface.
Plaster Frame / Collar
Die cast aluminum 1-1/2” deep 
collar accommodates ceiling 
materials up to 2”. Universal 
mounting bracket accepts 1/2” 
EMT, C channel and bar hangers 
and adjusts 5” vertically from 
above and below the ceiling.
Junction Box
Listed for (8) #12 AWG (four in, 
four out) 90°C conductors and feed 
thru branch wiring. (4) 1/2” and (2) 
3/4” trade size pry outs positioned 
to allow straight conduit runs. 
Lever connectors for simple push 
in wiring.
Thermal
Aluminum heat sink conducts heat 
away from the LED module for 
optimal performance and long life. 
LED
Chip on board with a multitude 
of highly efficient white LED’s, 
combined with a high reflectance 
upper reflector and convex 
transitional lens produce even 
distribution with no pixilation. 
Rated for 50,000 hours at 70% 
lumen maintenance. Auto 
resetting, thermally protected, 
LED’s are turned off when safe 
operating temperatures are 
exceeded. Color variation within 
3-step MacAdam ellipses. Quick 
disconnect allows for tool-less 
replacement of LED engine from 
below ceiling. Available in 80, 90 
or 97 CRI.
D2W™ – dim-to-warm shifts CCT 
from 3000K to1850K as fixture dims 
mimicking halogen sources.
W2N - Tunable white CCT range 
2700K to 6500K or 2000K to 5000K, 
90 CRI.
Driver
Standard 120-277V 0-10V dimming 
driver provides flicker free 
dimming from 100% to 1% (offered 
up to 4000 lumens). Optional 120V 
leading edge, <1% 0-10V, Fifth 
Light, DMX or Lutron® Ecosystem. 
Driver can be serviced from above 
or through the aperture.
Connected Lighting Systems
WaveLinx tilemount daylight 
sensor includes control module, 
sensor and cable allowing use 
with the comprehensive lighting 
system.
LumaWatt Pro (powered by 
Enlighted) wireless tile mount 
sensor and relay accessory enables 
wireless control using a tile mount 
sensor accessory.
Distributed low voltage power 
system combines power, lighting, 
and controls with ease of 
installation. 
Code Compliance
Thermally protected and cULus 
listed for wet locations with 
covered ceiling. IP66 rated 
when used with IP66 gasket kit 
accessory. Optional City of Chicago 
environmental air (CCEA) marking 
for plenum applications. EMI/RFI 
emissions per FCC 47CFR Part 18 
Class B consumer limits. Non-IC 
rated - Insulation must be kept 3” 
from top and sides of housing. 
IC rated up to 1500 lumens. 5000 
lumen and above are marked 
spacing and must follow spacing 
requirements. RoHS Compliant. 
Photometric testing completed in 
accordance with IES LM 79 and 
TM-30 standards. LED life testing 
completed in accordance with LM 
80 standards.
Warranty
5-year warranty
LD6B EU6B 
6LBW 6LBM 
6LBN
1000 - 7000 lumens LED 
STEPREPEAT>
Narrow, Medium, or Wide Beam
New Construction 
6 inch LED recessed narrow, medium, or wide beam downlight designed 
for glare free even illumination. Featuring a two-stage diffused reflector 
system producing smooth distribution with excellent light control and 
low aperture brightness. Lumen packages range from 1000 to 7000 with 
color temperatures of 2400K, 2700K, 3000K, 3500K, 4000K, and 5000K. 
VividTune: Dim-to-warm technology – similar to halogen at full power, 
the 3000K LED warms smoothly as dimmed to 1850K creating a rich 
warm glow within the space. Tunable white technology - adjust the 
color temperature from warm white to cool white while independently 
controlling intensity.
DESCRIPTION
Refer to ENERGY STAR
®
 Qualified 
Products List. Can be used to comply 
with California Title 24 High Efficacy 
requirements.
1000-2000 LUMENS 3000-5000 LUMENS 6000-7000 LUMENS
NARROW
EM OPTION
5-15/16" [151mm] 5-15/16" [151mm] 7-11/16" [195mm]
MEDIUM 5-7/8" [149mm] 5-7/8" [149mm] 7-5/8" [194mm
WIDE 5-1/2" [140mm] 5-1/2" [140mm] 6-13/16" [173mm]
SHALLOW TRIM 5-1/2" [140mm] 5-1/2" [140mm] NA
5-1/2"
[141mm]
11-15/16"
[303mm]
16-3/4"
[426mm]
6-3/8"
[161mm]
7"
[176mm]
MAX HEIGHT
(SEE TABLE)
13-3/4"
[349mm]
11-1/8"
[283mm]
TD520041EN
October 5, 2018 8:54 AM
Portfolio
Catalog #
Type
Project
Comments
Date
Prepared by




