Installation Guide

4
Lowes.com/
p
ortfolio
ASSEMBLY INSTRUCTIONS
Install bulb (O) into floor lamp assembly.
3.
Remove preassembled cap from end of power cord
and plug power cord into wall outlet.
NOTE: Use preassembled switch on socket
assembly (C) to turn lamp ON/OFF.
1.
31
Remove uplight socket ring (L) from socket on
uplight (N). Attach glass shade (M) to the socket,
securing with uplight socket ring (L).
CAUTION: Do not overtighten uplight
socket ring (L) as glass may crack or break.
CAUTION:
When replacing bulb, please allow
bulb and glass shade to cool down before touching.
Socket
L
N
If light does not function, please refer to
TROUBLESHOOTING on page 6.
M
UPLIGHT ASSEMBLY:
43
Switch
2.
32
Remove preassembled cap from end of power cord
and plug power cord into wall outlet.
NOTE: Use preassembled switch on power
cord to turn lamp ON/OFF.
Install bulb (O) into uplight assembly.
CAUTION: When replacing bulb, please allow
bulb and glass shade to cool down before touching.
If light does not function, please refer to
TROUBLESHOOTING on page 6.
O
O
Hg
LAMP CONTAINS MERCURY
Manage in accordance with Spills, Disposal and Site Cleanup
Requirements. In case of breakage, follow clean-up
procedures provided by contacts below.
www.epa.gov/cflcleanup
1-866-284-4010
Hg
LAMP CONTAINS MERCURY
Manage in accordance with Spills, Disposal and Site Cleanup
Requirements. In case of breakage, follow clean-up
procedures provided by contacts below.
www.epa.gov/cflcleanup
1-866-284-4010