Installation Guide

ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
1
2
3
Machine screw
Crossbar
x 2
x 1
x 3
x 2
3. Attach wire nuts (CC). Tape wire nuts (CC)
and wires together with electrical tape (not
included).
Wire nut
Mounting screw
B
BB
B
DD
B
B
CC
AA
CC
ASSEMBLY INSTRUCTIONS
4
5
6
6. Install glass shade (B). Tighten side screws (C)
to secure glass shade (B).
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded outlet box.
BB
DD
A
AA
C
B
4 5
1. Attach the crossbar (DD) to the outlet box
(not included) using two machine screws (BB).
4. Remove mounting screws (AA) from crossbar
(DD). Place the xture (A) over the outlet box.
Insert mounting screws (AA) to secure xture (A).
5. Install light bulb (not included). Use 60-watt max.
standard-base incandescent bulb or halogen/
CFL/LED equivalent.