Installation Guide

ASSEMBLY INSTRUCTIONS
7
Carefully arrange excess wiring and wire
connectors (AA) within canopy of fixture
(A).
Align holes in edge of canopy with screw
holes at ends of mounting strap (C).
Secure fixture (A) with mounting strap
screws (D) that were removed in Step 3 on
page 5.
Outlet Box
D
A
8
Restore power and test fixture (A).
If light does not function, please refer to the
TROUBLESHOOTING on the next page.
Install one medium-base 60-watt max. bulb
(not included).
Important: When replacing bulb, please
allow bulb and glass shade to cool down
before touching.
Remove socket ring (B) from the socket on
fixture (A). Attach glass shade (not included)
to the socket using socket ring (B).
Note: Do not overtighten socket ring (B) as
glass may crack or break.
10
9
8.
9.
10.
C
D
D
Glass Shade
[representative
only]
A
Glass Shade
[representative
only]
Socket
A
B
Bulb