Installation Guide

6
D
ASSEMBLY INSTRUCTIONS
6.
Prepare wire by stripping 3/4 in. of insulation from
wire ends using wire strippers. Tie wire into a
knot. (Fig. 6A)
Connect one of the wires (or WHITE wire) from
fixture (A) to WHITE wire from outlet box using
existing wire connector or wire connector (AA).
Connect the other wire (or BLACK wire) from
fixture (A) to BLACK wire from outlet box using
existing wire connector or wire connector (AA).
Connect BARE/GREEN ground wire from outlet
box to BARE ground wire from mounting bracket
(C) using existing wire connector or wire
connector (AA). (Fig. 6B)
Note: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect ground wire to
white or black power supply wires.
WARNING: To reduce the risk of fire, electrical
shock, or personal injury, wire connectors (AA)
provided with this light fixture are designed to
accept only one 12-gauge house wire and two
lead wires from the light fixture. If your house wire
is larger than
12-gauge or there is more than one house wire to
connect to the two fixture lead wires, consult an
electrician for the proper size wire connectors to
use.
Hardware Used
E3 Wire Connector x 3
AA
6
7A
A
Outlet Box
6A
6
7A
6B
WHITE
AA
AA
A
Wrap electrical tape (not included) around
each individual wire connector (AA) down
to the wire.
Warning: Make sure no bare wire or
wire strands are visible after making
connections.
7.
C
A
7
Outlet Box
AA
AA
Bare/Green
Bare
BLACK
C
Wire from fixture
(or WHITE)
Wire from fixture
(or BLACK)