Installation Guide

5
Remove mounting strap (C) from fixture (A) by
removing mounting strap screws (D) from the
edges of the fixture (A).
Save mounting strap screws (D) for later use.
Canopy
E
C
A
3
Outlet Box
Attach mounting strap (C) to outlet box (not
included) using the existing screws and
washers provided with the outlet box. Make
sure canopy on fixture (A) can be secured to
the ceiling after mounting strap (C) is
attached.
Make sure the outlet box can support 35
lbs. hanging weight. Use metal outlet box;
plastic outlet boxes are not recommended.
Outlet Box
Screws and
Washers
ASSEMBLY INSTRUCTIONS
4
D
D
3.
4.
C
5.
Cord
Restraint
A
5
Remove plastic piece from wire on inside of
canopy on fixture (A). Discard plastic piece.
If you wish to change cord length, loosen
cord restraint and adjust cord to desired
hanging length. Pull cord through canopy
until at proper length, and then tighten cord
restraint to hold cord at desired length. Do
NOT overtighten cord restraint.
Plastic
Piece