Installation Guide

ASSEMBLY INSTRUCTIONS
7
Remove socket ring (B) from the socket on fixture
(A). Attach glass shade (sold separately) to the
socket using socket ring (B).
CAUTION: Do not overtighten socket ring (B)
as glass may crack or break.
10
10.
Carefully arrange excess wiring and wire
connectors (AA) within canopy.
Align holes in edge of canopy with screw holes at
ends of mounting strap (C). Secure fixture (A) with
mounting strap screws (D) that were previously
removed (Step 3, page 5).
9.
Glass Shade
[representative
only]
Socket
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
8.
Outlet Box
8
AA
AA
AA
Outlet Box
9
A
Canopy
A
B
C
D
D