Installation Guide

6
ASSEMBLY INSTRUCTIONS
Connect BARE/GREEN ground wire from outlet
box to BARE wire on mounting strap (C) using wire
connector (AA). Connect one of the wires from
fixture (A) to WHITE wire from outlet box using wire
connector (AA). Connect the remaining wire from
fixture (A) to BLACK wire from outlet box using wire
connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect BARE/GREEN
ground wire to WHITE or BLACK power supply
wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA)
provided with this light fixture are designed to
accept only one 12-gauge house wire and two lead
wires from the light fixture. If your house wire is
larger than 12-gauge or there is more than one
house wire to connect to the corresponding fixture
lead wires, consult an electrician for the proper size
wire connectors to use.
Hardware Used
Wire Connector x 3
AA
7.
A
C
AA
7
Outlet Box
Fixture Wire
Fixture Wire
BARE/GREEN
Wire from
Outlet Box
BARE Wire
from
Mounting Strap
BLACK Wire
from Outlet Box
You may need to cut the excess wire to simplify the
wiring. You will need at least 10 in. of wire to work
with.
Prepare wire by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included). Tie
wire into a knot.
6.
10 in.
6
A
AA
AA
WHITE Wire
from Outlet Box
A