Installation Guide

7
ASSEMBLY INSTRUCTIONS
9.
10.
Restore power and test fixture (A).
If lights do not function, please refer
to TROUBLESHOOTING on the
next page.
CAUTION: When replacing bulbs, please
allow bulbs and glass shades to cool down
before touching.
Lowes.com/
p
ortfolio
10
A
Carefully arrange excess wiring and wire
connectors (AA) within canopy at top of
fixture (A).
Align holes in canopy with screws (D) on
mounting strap (B) and push up. Secure
fixture (A) to ceiling with the two
decorative nuts (C) previously removed
(Step 3, page 5).
9
Outlet Box
Canopy
Install 1 standard-base bulb (not included).
Use either a 60-watt max. incandescent bulb
or a 13-watt CFL.
B
A
C
C
D
8
Wrap electrical tape (not included) around
each individual wire connector (AA) down
to the wire.
WARNING: Make sure no bare wire or
wire strands are visible after making
connections.
8.
Outlet Box
AA
AA
AA