Installation Guide

5
ASSEMBLY INSTRUCTIONS
3.
Lowes.com/
p
ortfolio
Remove decorative nuts (C) from screws (D)
on mounting strap (B). Save for later use.
NOTE: Do not remove screws (D) or nuts (E)
from mounting strap (B).
B
C
D
E
33
Attach mounting strap (B) to the outlet box
(not included) using the existing screws and
washers provided with the outlet box.
CAUTION: Make sure the outlet box can
support 35 lbs. hanging weight. Use metal
outlet box; plastic outlet boxes are not
recommended.
4
4.
4
Outlet Box
Outlet Box
Screws and
Washers
B
While gripping one of the nuts (E) with pliers (not
included), loosen screw (D) 1/2 turn and then
loosen nut (E) until it reaches approximately the
midway point of the screw (D). Repeat for other
screw (D) and nut (E).
Temporarily place fixture (A) over mounting strap
(B) to determine amount of adjustment necessary
for screws (D) on mounting strap (B).
Note: Screws (D) should come through holes in
top of fixture (A) just enough so decorative nuts
(C) fit flush against fixture (A) when mounted.
Once screws (D) are adjusted, use pliers to
tighten nuts (E) on screws (D) until nuts (E) touch
mounting strap (B).
5.
Outlet Box
A
E
D
B
5
E
D