Installation Guide

9
ASSEMBLY INSTRUCTIONS
Install one 60-watt max. standard-base
incandescent bulb (not included) or CFL/LED
equivalent.
WARNING: When replacing bulb, please
allow bulb and glass shade to cool down before
touching.
Restore power and test fixture (A).
If light does not function, please refer to the
TROUBLESHOOTING on the following page.
11
11.
Bulb (not included)
A
Carefully arrange excess wiring and wire
connectors (AA) within canopy of fixture (A).
Align holes in edge of canopy with screw
holes at ends of mounting strap (B). Secure
fixture (A) with mounting strap screws (C)
that were removed in Step 3 on page 6.
Outlet Box
9
Remove socket ring (E) from socket on
fixture (A). Attach glass shade (sold
separately) to socket using socket ring (E).
WARNING: Do not overtighten socket
ring (E) as glass may crack or break.
10
9.
10.
Glass Shade
(representative
only;
sold separately)
Socket
A
C
C
B
A
E
Canopy