Installation Guide

Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
ASSEMBLY INSTRUCTIONS
8
8.
8
Outlet Box
AA
AA
A
7a.
Hardware Used
Outlet Box
WHITE
BARE/
GREEN
BARE
BLACK
WHITE
AA
AA
A
You may need to cut the excess wire to simplify the
wiring. You will need at least 10 in. of wire to work
with.
Prepare wire by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included).
Connect BARE/GREEN ground wire from outlet box
to BARE wire from mounting strap (B) using wire
connector (AA). Connect BLACK wire from fixture (A)
to BLACK wire from outlet box using existing wire
connector or wire connector (AA). Connect WHITE
wire from fixture (A) to WHITE wire from outlet box
using existing wire connector or wire connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect BARE/GREEN
ground wire to WHITE or BLACK power supply
wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA)
provided with this light fixture are designed to accept
only one 12-gauge house wire and two lead wires
from the light fixture. If your house wire is larger than
12-gauge or there is more than one house wire to
connect to the corresponding fixture lead wires,
consult an electrician for the proper size wire
connectors to use.
10 inches
A
A
6
7A
7a
7b.
AA
BLACK
B
Wire Connector
x 3
7A
7b
AA