Installation Guide

Lowes.com/portfolio

ASSEMBLY INSTRUCTIONS

Feed chain (H) and wiring through threaded

ring (E) and then canopy (B), allowing

threaded ring (E) and canopy (B) to slide

down the chain (H) until they reach the top

of fixture (A).

Hang open link of chain (H) onto screw

collar loop (F) and then close link.

BLACK

Fixture

Wire

BARE/

GREEN

Ground Screw

Feed wiring up through hole at bottom of

threaded rod (D). Gently push wiring until it

comes through top of threaded rod (D). Pull

all wiring until there is no extra slack left in the

wires running through the chain (H).

Wiring

Prepare wire by stripping 3/4 in. of insulation

from wire ends using wire strippers (not

included).

Connect one of the wires from fixture (A) to the

BLACK wire from outlet box using wire connector

(AA). Connect the other wire from fixture (A) to the

WHITE wire from outlet box using wire connector

(AA). Connect BARE/GREEN wire from outlet box to

BARE ground wire from fixture (A) using wire

connector (AA).

NOTE: If outlet box does not have a BARE/GREEN

wire, the BARE ground wire from fixture (A) should be

attached to the GREEN SCREW (labeled GND) on

mounting strap (C).

WHITE

Fixture

Wire

BARE

Hardware Used

Wire Connector

x 3