Installation Guide

ASSEMBLY INSTRUCTIONS

Lowes.com/

ortfolio

Attach mounting strap (C) to the outlet box (not

included) using the existing screws and washers

provided with the outlet box.

CAUTION: Make sure the outlet box can

support 35 lbs. hanging weight. Use metal outlet

box; plastic outlet boxes are not recommended.

Outlet Box

Screws and

Washers

Outlet Box

Determine the hanging length for fixture (A).

Use pliers, a flathead screwdriver and a soft cloth

(all not included) to open the link of chain (H) at

length chosen. Remove any extra chain (H) at this

time.

Feed wiring from fixture (A) up through chain (H)

to pre-determined length.

Remove threaded ring (E) from screw collar loop (F)

and save for later use.

Temporarily place canopy (B) over mounting strap

threaded rod (D). NOTE: Canopy (B) should fit flush

against ceiling when mounted. Once threaded rod

(D) is adjusted, tighten hex nut (G) securely against

mounting strap (C).

Set canopy (B) aside.

Soft Cloth

Pliers

Screwdriver

Wiring