Installation Guide

14.
After completing installation, caulk fixture (H)
mounting surface with silicone weather
sealant (not included).
WARNING: Failure to caulk fixture mounting
surface with silicone weather sealant may result
in water damage in outlet box, which may cause
electrical malfunction or electrical shock.
14
ASSEMBLY INSTRUCTIONS
H
13.
13
Install one standard-base bulb (not
included). Use a 60-watt max. incandescent
bulb or CFL/LED equivalent.
CAUTION: When replacing bulb, please
allow bulb and shade to cool down before
touching.
Restore power and test fixture (H).
If light does not function, please refer to
TROUBLESHOOTING on the next page.
Bulb
H
9
12.
12
J
H
DD DD
Attach shade (J) to fixture (H) using mounting
screws (DD). Tightening mounting screws
(DD) completely with a Phillips Screwdriver
(not included).
Hardware Used
Mounting Screw
x 2
DD