Installation Guide

BLACK

Fixture

Wire

BARE/

GREEN

Ground Screw

Connect one of the wires from fixture (H) to the

BLACK wire from outlet box using wire connector

(AA). Connect the other wire from fixture (H) to the

WHITE wire from outlet box using wire connector

(AA). Connect BARE/GREEN wire from outlet box to

BARE ground wire from fixture (H) using wire

connector (AA).

NOTE: If outlet box does not have a BARE/GREEN

wire, the BARE ground wire from fixture (H) should be

attached to the GREEN SCREW (labeled GND) on

mounting strap (C).

WHITE

Fixture

Wire

BARE

Hardware Used

Wire Connector

x 3

Outlet Box

ASSEMBLY INSTRUCTIONS

11.

Carefully arrange excess wiring and wire

connectors (AA) within outlet box.

Slide canopy (A) and threaded ring (E) up the

chain (B). Secure canopy (A) to mounting strap (C)

by tightening the threaded ring (E).

Wrap electrical tape (not included) around

each individual wire connector (AA) down

to the wire.

WARNING: Make sure no bare wire or

wire strands are visible after making

connections.

10.

Outlet Box