Installation Guide

Align hole in glass shade (B) with threaded rod
(E) and push up gently on glass shade (B) until
threaded rod (E) comes through hole in glass
shade (B). Re-attach rubber washer (F). Secure
glass shade (B) with nut (G) previously removed
(Step 7 above).
Attach finial plate (H); secure with finial (I)
previously removed (Step 7 above).
CAUTION: Do not overtighten nut (G) or
finial (I) as glass may crack or break.
ASSEMBLY INSTRUCTIONS
7
Remove finial (I), nut (G) and rubber washer (F)
from threaded rod (E). Save all for later use.
Adjust other nut (G) to middle of threaded rod
(E). Attach threaded rod (E) to fixture (A) and
tighten threaded rod (E) with pliers (not
included) -- hold pliers just under nut (G) so as
not to strip threads on threaded rod (E). Once
threaded rod (E) is completely tightened, use
pliers to secure nut (G) to bottom of fixture (A).
7.
8.
Carefully arrange excess wiring and wire
connectors (AA) within outlet box.
Align key-slot holes on fixture (A) with fixture
screws (D) on mounting strap (C) and push up.
Turn fixture (A) clockwise until it no longer turns.
Secure fixture (A) to mounting strap (C) by
tightening the fixture screws (D).
9.
9
E
B
H
I
F
G
8
A
Outlet Box
D
D
C
I
7
A
E
F
G
G