Installation Guide

ASSEMBLY INSTRUCTIONS

Unwrap BARE fixture wire from BLACK and WHITE

fixture wires. Prepare wire by stripping 3/4 in. of

insulation from wire ends using wire strippers (not

included). Connect WHITE wire from fixture (A) to

WHITE wire from outlet box using existing wire

connector or wire connector (AA). Connect BLACK

wire from fixture (A) to BLACK wire from outlet box

using existing wire connector or wire connector

(AA). Connect BARE/GREEN ground wire from

outlet box to BARE ground wire from fixture (A)

using existing wire connector or wire connector

(AA).

NOTE: Screw wire connectors (AA) on in a

clockwise direction.

WARNING: Never connect BARE/GREEN

ground wire to WHITE or BLACK power supply

wires.

WARNING: To reduce the risk of fire, electrical

shock or personal injury, wire connectors (AA) are

designed to accept only one 12-gauge house wire

and two lead wires from the light fixture. If your

house wire is larger than 12-gauge or there is more

than one house wire to connect to the

corresponding fixture lead wires, consult an

electrician for the proper size wire connectors to

use.

x 3

Hardware Used

Wire Connector

Wrap electrical tape (not included) around each

individual wire connector (AA) down to the wire.

WARNING: Make sure no bare wire or wire

strands are visible after making connections.

Outlet Box

BARE/

GREEN

BLACK

BARE

WHITE

BLACK

WHITE