Installation Guide

Prepare wire by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included).
Connect WHITE wire from fixture (A) to WHITE wire
from outlet box using existing wire connector or wire
connector (AA).
Connect BLACK wire from fixture (A) to BLACK wire
from outlet box using existing wire connector or wire
connector (AA).
Wrap BARE/GREEN ground wire from outlet box
around GREEN GROUND SCREW from fixture (A).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA) are
designed to accept only one 12-gauge house wire
and two lead wires from the light fixture. If your
house wire is larger than 12-gauge or there is more
than one house wire to connect to the
corresponding fixture lead wires, consult an
electrician for the proper size wire connectors to
use.
6
ASSEMBLY INSTRUCTIONS
Lowes.com/
p
ortfolio
6.
x 3
Hardware Used
E3 Wire Connector
AA
6
Outlet Box
BARE/
GREEN
WHITE
BLACK
BARE
AA
AA
D
Attach mounting strap (D) to outlet box (not
included) using the existing screws and
washers.
Adjust threaded rod (E) to proper height on
mounting strap (D). Once threaded rod (E) is
adjusted, use pliers (not included) to tighten
preassembled nut on threaded rod (E) until it
touches mounting strap (D).
CAUTION: Make sure the outlet box can
support 35 lbs. hanging weight. Use metal outlet
box; plastic outlet boxes are not recommended.
5
Outlet Box
Screws and
Washers
Outlet Box
5.
D
E
A
Nut