Installation Guide

ASSEMBLY INSTRUCTIONS
5
Lowes.com/portfolio
3. Position threaded nipple (C) in mounting bracket
(B) so that, when mounted:
• The threaded nipple (C) will protrude a
minimum of 1/4 inch beyond the raised center
portion of the bracket (B).
• The threaded nipple (C) height should be
positioned so that 1/2 the exterior threads of
the screw collar loop (I) will extend past the
canopy (A), when it is mounted.
4
1/4 Inch
D
C
I
B
3
B
A
1/4 Inch
I
C
Hardware Used
Short Machine
Screw
x 2
BB
5. Attach mounting bracket (B) to the outlet box
with short machine screws (BB).
5
Outlet Box
C
B
BB
4. Once the proper position of the threaded nipple
(C) and bracket (B) has been determined,
secure with hex nuts (D) as follows:
• Screw one hex nut (D) onto the threaded
nipple (C) and tighten against the raised
portion of the bracket (B).
• Screw another hex nut (D) onto the threaded
nipple (C) and tighten against the flat portion
of the mounting bracket (B).
• Screw the remaining hex nut (D) onto
threaded nipple (C) and tighten against the
screw collar loop (I).