Installation Guide

Hardware Used

ASSEMBLY INSTRUCTIONS

Lowes.com/portfolio

Short Machine

Screw

x 2

1. Screw threaded nipple (C) into screw collar loop

(I) a minimum of 1/4 in. Lock in place with a

preassembled hex nut (D). Screw second hex

nut (D) to the center of threaded nipple (C).

Orient mounting bracket (B) so the raised center

portion protrudes into the outlet box (not

included). Screw threaded nipple (C) into the

mounting bracket (B) and lock in place with the

third hex nut (D). Connect mounting bracket (B)

to the outlet box with short machine screws (BB).

Outlet

Box

2. Pass canopy (A) over the screw collar loop (I).

Turn the screw collar loop (I) in or out of the

mounting bracket (B) until 1/2 of the screw collar

loop (I) exterior threads are exposed. After a

desired position is found, lock threaded nipple

up against the mounting bracket (B). Attach

screw collar ring (H) to screw collar loop (I).

3. Using the open chain links, attach one end of chain

(K) to screw collar loop (I) and the other end to

fixture loop (L). Weave the fixture electrical and

ground wires through every other chain link and

pass through threaded nipple (C) into outlet box.

Lower the screw collar ring (H) and canopy (A) over

the chain (K).

Outlet

Box