Use and Care Guide

ASSEMBLY INSTRUCTIONS
5
Lowes.com/portfolio
x 2
CC
Threaded
Knobs
Hardware Used
4. Mounting surface should be clean, dry, flat
and 1/4 in. larger than the canopy (A) on all
sides. Any gaps between the mounting
surface and canopy (A) exceeding 3/16 in.
should be corrected as required. With silicone
caulking compound (not included), caulk
completely around where back of canopy (A)
meets the wall surface to prevent water from
seeping into outlet box.
5. Pass the canopy (A) over the long
machine screws (DD) protruding from the
mounting bracket (EE) and secure in place
with threaded knobs (CC).
4
DD
EE
5
CC
A
A
CONNECT HOT, BLACK OR RED OUTLET SUPPLY WIRE TO: CONNECT NEUTRAL, WHITE OUTLET SUPPLY WIRE TO:
Black White
* Parallel Cord (round and smooth) * Parallel Cord (square and ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with Copper Metal Conductor Insulated Wire (not green) with Silver Metal Conductor
3. Supply wire connection guide: Make wire connections, securing with wire connectors (AA), following
the reference chart listed below.
*NOTE:
When parallel wire (SPT I & SPT II) is used,
the neutral wire is square shaped and ridged
and the hot wire will be round in shape and
smooth.
3
Hardware Used
x 2Wire Connector
AA