Use and Care Guide

GND
EE
FF
Short Machine
Screws
x 2
x 1
BB
EE
Mounting
Bracket
GND
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
4
BB
Outlet Box
(Not Included)
EE
2. Wire connection guide:
Ground wire:
• For installation in the United States:
Wrap ground wire from outlet box around
ground screw (FF) on mounting bracket (EE),
no less than 2 in. from wire end. Tighten
ground screw (FF). If fixture is supplied with
a ground wire, connect to outlet ground wire
with an extra wire connector (AA).
• For installation in Canada:
If fixture is supplied with ground wire, wrap
ground wire around ground screw (FF) on
mounting bracket (EE). Tighten ground
screw (FF).
x 2
Long
Machine
Screws
DD
1
2
DD
1. Insert long machine screws (DD) into the
mounting bracket (EE) before connecting
to the outlet box. The two long machine screws
(DD) should protrude through mounting bracket
(EE) for securing canopy (A) in later steps.
Connect the mounting bracket (EE) with short
machine screws (BB).
x 1Wire Connector
AA
AA
Lowes.com/portfolio