Installation Guide

ASSEMBLY INSTRUCTIONS
5
Hardware Used
FF
4. Attach end of chain (G) to screw collar loop (H) with
one of the open chain links. Weave the fixture
electrical and ground wires through every other
chain link and pass through threaded nipple (FF)
into outlet box. Lower the screw collar ring (B) and
canopy (A) over the chain (C). (See Fig. 4.)
H
FF
CC
DD
B
G
3. Pass canopy (A) over the screw collar loop (H).
Turn the screw collar loop (J) in or out of the
mounting bracket (DD) until 1/2 of the screw
collar loop (H) exterior threads are exposed.
After a desired position is found, lock threaded
nipple (FF) in place by tightening the second
hexnut (CC) up against the mounting bracket
(DD). Attach screw collar ring (B) to screw collar
loop (H). (See Fig. 3.)
x 1
Hexnut
x 2
CC
DD
Mounting
Bracket
GND
H
3
4
C
x 1
FF
Threaded
Nipple
Hardware Used
x 1
FF
Threaded
Nipple