Installation Guide

ASSEMBLY INSTRUCTIONS
Machine
Screws
x 2
x 1
BB
Hexnut
x 2
CC
DD
Mounting
Bracket
Hardware Used
4
Outlet
Box
(Not
Included)
BB
1. Screw fixture loop (D) into hex coupling (F) on
fixture body (E) by turning counter-clockwise.
(See Fig. 1.)
H
FF
CC
DD
2. Connect mounting bracket (DD), with machine
screws (BB) to the outlet box. Orient mounting
bracket (DD) to that the raised center portion
protrudes into the outlet box. Screw threaded
nipple (FF) into screw collar loop (H) a
minimum of 1/4 in. Lock in place with hexnut
(CC). Screw second hexnut (CC) to the center
of threaded nipple (FF) and screw into
mounting bracket (DD). (See Fig. 2.)
GND
x 1
FF
Threaded
Nipple
1
2
F
E