Operating Guide

Long Machine

Screws

x 2

x 1

Mounting

Bracket

ASSEMBLY INSTRUCTIONS

Hardware Used

Outlet Box

x 1

Mounting

Bracket

Ground

Screw

2. Wire connection guide (See Fig. 2.):

Ground wire:

• For installation in the United States:

Wrap ground wire from outlet box around

ground screw (FF) on mounting bracket (EE),

no less than 2 in. from wire end. Tighten

ground screw (FF). If fixture is supplied with

a ground wire, connect to outlet ground wire

with a wire connector (AA).

• For installation in Canada:

If fixture is supplied with ground wire, wrap

ground wire around ground screw (FF) on

mounting bracket (EE). Tighten ground

screw (FF).

Short Machine

Screws

x 2

1. Insert two machine screws (BB) into the

mounting bracket (EE) before connecting

to the outlet box (not included). The two machine

screws (BB) should protrude through mounting

bracket (EE) for securing canopy (A) in later steps.

Connect the mounting bracket (EE), with two

machine screws (BB), to the outlet box. Orient the

mounting bracket (EE) so that the raised center

portion protrudes into the outlet box. (See Fig. 1.)

x 1

Wire Connector

GND