Installation Guide

ASSEMBLY INSTRUCTIONS
Hardware Used
5
CC
DD
B
3. Pass canopy (A) over the screw collar loop (K).
Turn the screw collar loop (K) in or out of the
mounting bracket (DD) until 1/2 of the screw
collar loop (K) exterior threads are exposed.
After a desired position is found, lock threaded
nipple (FF) in place by tightening the second
hexnut (CC) up against the mounting bracket
(DD). Attach screw collar ring (B) to screw collar
loop (K). (See Fig. 3.)
x 1
Hexnut x 2
CC
DD
Mounting
Bracket
GND
I
J
FF
K
FF
K
3
4
x 1FF
Threaded
Nipple
Outlet
Box
(Not
Included)
4. Attach end of chain (J) to screw collar loop (K) and
fixture loop (C) with open chain link (I). Weave the
fixture electrical and ground wires through every
other chain link and pass through threaded nipple
(FF) into outlet box. Lower the screw collar ring (B)
and canopy (A) over the chain (J). (See Fig. 4.)
Lowes.com/portfolio