Installation Guide

ManualsBrandsPortfolio ManualsFlexible Track Lighting Kits6-Light 96-in Bronze Dimmable Standard Flexible Track Light with Tea stained Glass

Printed in China

CARE AND MAINTENANCE

• This unit is suitable for indoor use only.

• Clean this unit periodically. Clean only using water and mild soap; dry with a soft cloth.

Never use rough cloth, abrasives or chemical cleaners containing acids or harsh solvents.

• Bulb replacement: Use 50-watt GU10-base bulbs or less.

WARRANTY

Manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for

one (1) year from the date of original purchase.

This warranty does not cover parts becoming defective due to misuse, accidental damage,

improper handling and/or installation and specifically excludes liability for indirect, incidental or

consequential damages. Product found to be defective may or may not be replaced with same or

like type product, contingent on the nature of the defect, and or replacement availability and or

compensated for at a pro rated value.Some states do not allow limitations on how long an implied

warranty lasts, and/or the exclusion or limitation of incidental or consequential damages, so the

above limitations or exclusions may not apply to you. This warranty gives you specific rights and

you may also have other rights, which vary from state to state. Proof of purchase is required to

exercise the warranty.

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m.,

EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.

TROUBLESHOOTING

If you have any questions regarding the product, please call our customer service department at

1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

Bad main supply wiring Consult a certified professional electrician

Consult a certified professional electrician

Defective switch

Fuse blows or

circuit trips when

fixture is turned on

Wrong wiring or power

wire is grounding out

Light will not turn on

Track section is installed in

oppostite direction and exposed

copper wire is

facing down in

ceiling application or facing

front in wall application

Install the track section properly by

ensuring exposed copper wire on the

track rail is facing the ceiling and facing

the wall for wall installation

Ground, "L" , "N" contacts of

track head assembly and/or

power feed stem are not

aligned properly with

contacts of track rail

Ensure all contacts are aligned and

connectors on power feed stem and

track head assembly are closed properly

Glass Shade

DESCRIPTIONPART