Installation Guide

Threaded
Knobs
x 2
x 2
Long
Machine
Screw
DD
CC
x 1
EE
Mounting
Bracket
ASSEMBLY INSTRUCTIONS
Hardware Used
7
GND
DD
CC
EE
6. Supply wire connection guide: Make wire connections, securing with wire connectors (AA),
following the reference chart listed below.
CONNECT, HOT, BLACK OR RED OUTLET SUPPLY WIRE TO: CONNECT, NEUTRAL, WHITE OUTLET SUPPLY WIRE TO:
Black White
* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor
6
Hardware Used
x 2
Wire Connectors
AA
7
8
8. Insert standoffs (J) into couplings (G) mounted
on ceiling and secure with Allen setscrews (K)
by using the Allen wrench (JJ). (See Fig. 8.)
*NOTE:
When parallel wire (SPT I & SPT II) is used. The neutral
wire is square shaped and ridged and the hot wire will be
round in shape and smooth. (See Fig. 6.)
x 1
JJ
Allen
Wrench
Hardware Used
JJ
G
J
K
Ceiling
7. Pass the ceiling canopy (A) over the long machine
screws (DD) protruding from the mounting bracket
(EE) and secure in place with threaded knobs (CC).
(See Fig. 7.)