Installation Guide

ASSEMBLY INSTRUCTIONS

GND

3. Twist lock GU10 bulbs (F) into threaded socket (B).

(See Fig. 3.)

4. Wire connection guide (See Fig. 4.):

a.) Ground wire:

• For installation in the United States:

Wrap ground wire from outlet box around

ground screw (FF) on mounting bracket (EE),

no less than 2 in. from wire end. Tighten

ground screw (FF). If fixture is supplied with

a ground wire, connect to outlet ground wire

with an extra wire connector (not included).

• For installation in Canada:

If fixture is supplied with ground wire, wrap

ground wire around ground screw (FF) on

mounting bracket (EE). Tighten ground

screw (FF).

b.) Supply wire:

Make wire connections, with wire

connectors (AA), following the

reference chart listed below.

*NOTE:

When parallel wire (SPT I & SPT II) is used.

The neutral wire is square shaped and ridged

and the hot wire will be round in shape and

smooth. (See Fig. 5.)

Fig. 5

CONNECT, HOT, BLACK OR RED OUTLET SUPPLY WIRE TO: CONNECT, NEUTRAL, WHITE OUTLET SUPPLY WIRE TO:

Black White

* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)

Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor. Insulated Wire (not green) with Silver metal conductor.

Fig. 4

Mounting

Bracket

Ground

Screw

Hardware Used

Wire Connectors

GND

Fig. 3

x 2

x 1