Use and Care Guide

3



PREPARATION

Before beginning to assemble or install lighting fixture, make sure all parts are present. Compare

parts with package contents list and hardware contents list. If any part is missing or damaged, do

not attempt to assemble, install or operate the fixture.

●

Estimated Assembly Time: 30 - 60 minutes (Installation time will vary depending on skill level

and existing wiring conditions. Estimated installation time assumes standard wall junction box and

supply wiring are already installed).

●

Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, silicone

caulking adhesive.

●

Helpful Items (not included): Wire strippers, step ladder.

ASSEMBLY INSTRUCTIONS

1. Turn OFF power of work area at main circuit breaker or fuse

box.

CAUTION: DO NOT rely on wall switch alone to turn off

power.

2. Remove preassembled screw from top (B) to detach

preassembled finial. Re-install finial on top of top (B) using the

screw underneath.

3. Remove preassembled screws from the base of fixture (A)

and detach the crossbar (C) from fixture (A).