Use and Care Guide

4

3. Remove preassembled screws from the base of fixture (A)
and detach the crossbar (B) from fixture (A).
4. Attach the crossbar (B) to junction box (not included)
with the two screws (BB).
5. Connect ground wire from the junction box to the ground wire
from the fixture (A) by twisting a wire nut (CC) onto bare ends
of the wires.
Connect white wire from the junction box to the white wire
from the fixture (A) by twisting a wire nut (CC) onto bare ends
of the wires.
Connect the black wire from the junction box to the black wire
from the fixture (A) by twisting a wire nut (CC) onto
the
bare ends of the wires.
Make sure wire connections are secure.
Carefully place wires
into junction box, then re-attach fixture (A) to crossbar (B)
using previously removed screws.

Hardware Used
 Screw x2


4
3
Hardware Used
Wire Nut x3


5
B
A
B
B
A
B