Use and Care Guide

3

WARNING
● This fixture is designed to fit standard junction boxes as defined by the National Electrical Code.
● Consult a qualified electrician if you are not certain about the installation process. Always install
wiring connections in accordance with local code, ordinances and the National Electric Code.
PREPARATION
Before beginning to assemble or install lighting fixture, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or damaged, do
not attempt to assemble the product, install or operate the fixture.
●
Estimated Assembly Time: 30 - 60 minutes (Installation time will vary depending on skill level
and existing wiring conditions. Estimated installation time assumes standard wall junction box and
supply wiring are already installed).
● Tools Required for Assembly (not included): Phillips screwdriver, silicone caulking adhesive.
● Helpful Items (not included): Wire strippers, step ladder.
ASSEMBLY INSTRUCTIONS
1. Turn OFF all power to circuit at main circuit breaker or
fusebox.
CAUTION: DO NOT rely on wall switch alone to turn off
power.
2. Remove the preassembled screws on fixture (A) and detach
the shade. Install light bulb (not included) into socket of fixture
(A). Use 60-watt max. medium-base incandescent bulbs or
23-watt max. medium-base CFLs.
Then, re-attach shade to fixture (A) using previously removed
screws. Attach finial (AA) to the top of fixture (A) where
shown.
1
2
Hardware Used
Finial x1


A