Installation Guide

ManualsBrandsPortfolio ManualsSpot & Flood Lights(0W Equivalent black Solar LED Spot Light

PACKAGE CONTENTS/CONTENIDO DEL PAQUETE

ITEM/ARTÍCULO #

1176082

MODEL/MODELO #

00992

Serial Number/Número de serie

Purchase Date/Fecha de compra

ATTACH YOUR RECEIPT HERE

ADJUNTE SU RECIBO AQUÍ

SPOT LIGHT

REFLECTOR

PORTFOLIO

™

and PORTFOLIO

& Design™ are

trademarks or registered trademarks of LF, LLC.

PORTFOLIO

™

y PORTFOLIO

& Design™ son

marcas o marcas registradas de LF, LLC.

x 1

Battery (preassembled in Top Cover (A))

Batería (preensamblado en la cubierta superior (A))

x 1

Stake

Estaca

x 1

Spot Light

Reflector

PH18838

Summary of content (4 pages)

PAGE 1
ITEM/ARTÍCULO #1176082 SPOT LIGHT REFLECTOR MODEL/MODELO #00992 PORTFOLIO™ and PORTFOLIO & Design™ are trademarks or registered trademarks of LF, LLC. All rights reserved. PORTFOLIO™ y PORTFOLIO & Design™ son marcas o marcas registradas de LF, LLC. Todos los derechos reservados.
PAGE 2
SAFETY INFORMATION/INFORMACIÓN DE SEGURIDAD Please read and understand this entire manual before attempting to assemble, operate or install the product. Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. CAUTION/PRECAUCIÓN • This product contains a 18500 LiFePO4 rechargeable battery. Battery must be recycled or disposed of properly. • Do not mix alkaline, standard (carbon zinc), or rechargeable (Ni-Cd, Ni-MH, etc.) batteries.
PAGE 3
INSTALLATION OVERVIEW/DESCRIPCIÓN GENERAL DE LA INSTALACIÓN Attach the Spot light to the ground spike, push the assembly into the ground. Conecta el reflector a la estaca, empujar el conjunto en el suelo. A B To activate the battery remove the pull tab. Para activar la baterÍa retire la lengüeta. HOW TO REPLACE BATTERY/CÓMO REEMPLAZAR LA BATERÍA Remove old batteries and replace with brand-new 3.2V 1000mAh 18500 LiFePO4 solar rechargeable batteries (not included).
PAGE 4
CARE AND MAINTENANCE/CUIDADO Y MANTENIMIENTO CHARGING THE BATTERY/CARGA DE LA BATERÍA Remove the isolation strip from the bottom of the top housing to allow battery to charge. For optimum performance, it is best to install the solar light in full sunlight and charge for 10-12 hours. Allow the light to run at least 8-12 complete charging and discharging cycles to reach battery’s maximum capacity. Retire la banda de aislamiento de la parte inferior de la carcasa superior para que la batería se cargue.