Installation Guide

CARTON CONTENTSTOOLS NEEDED FOR ASSEMBLY

Supplied Not Supplied UNPACKING AND CHECKING CONTENTS

Carefully unpack the drill press and all its parts, and

compare against the list below and the illustration on the

next page. Place the drill press on a secure surface and

examine it carefully.

• To avoid injury from unexpected starting or electrical

shock, do not plug the power cord into a source of

power during unpacking and assembly. This cord

must remain unplugged whenever you are adjusting/

assembling the drill press.

• The drill press is heavy and should be lifted with

care. If needed, get the assistance of someone to lift

and move the drill press.

• If any part is missing or damaged, do not attempt

to assemble the drill press, or plug in the power

cord until the missing or damaged part is correctly

replaced.

TABLE OF LOOSE PARTS

ITEM

DESCRIPTION QUANTITY

A. Head Assembly 1

B. Table 1

C. Base 1

D. Hardware Bag

Lock Handles 2

Crank Handle 1

Arbor 1

Hex Wrenches 3

Wedge 1

Hex Bolts 4

E. Feed Handles Assembly 3

F. Chuck & Key Hardware

Chuck 1

Chuck Key 1

G. Column Assembly 1

WARNING

Slotted screwdriver

Adjustable wrenches

Wrench

3mm hex key

Combination square

block of wood

Hammer or rubber

mallet

5mm hex key

6mm hex key